electronics made easy
This is the old fritzing discussion forum. Search it for valuable information from 2009 to 2015.
Bendpoints issue in schematic view
In frz01.jpg the sketch I created first, then save and exit Fritzing.In frz02.jpg the sketch as it appear when reloaded in a new Fritzing session.In frz03.jpg the sketch after moving a component.Fritzing Version 0.9.0 (bda4e 2014-06-11) 64 [Qt 5.2.1]Lenovo Workstation, Windows 7 Enterprise SP1 64bit, Intel Xeon E5-1650, 16GB RAM, Quadro K400
Images attached to email at firstname.lastname@example.org